Chairman

  • Prof. Alain Bernard, President, French Rapid Prototyping Association, France

Co - Chairman

  • Dr. C G Krishnadas Nair, President, (SIATI), Banglaore
  • Dr. Jebraj, AU-FRG Institute of CAD/CAM, Anna University Campus, Chennai.
  • Dr. Dermot Brabazon, Mechanical & Manufacturing Engineering, Dublin City University, Ireland
  • Dr.Brent Stucker, Professor & Clark Chair of Computer Aided Engineering, Industrial Engineering Dept., University of Louisville
  • Prof. Jean-Pierre Kruth, Professor, KU Leuven University, Belgium
  • Dr. Brenda Timmerman, Senior Research Fellow, Additive Layer Manufacturing Group Lead, University of Warwick, UK
  • Ehsan Toyserkani, Ph.D., P.Eng., Professor, Director of Multi-Scale Additive Manufacturing Lab, Department of Mechanical and Mechatronics Engineering, University of Waterloo, Canada
  • Dr. David Bourell, Temple Foundation Professor – Aerospace, Mech & Manufacture Engineering Department. University of Texas Austin, USA.
  • Prof. Ian Gibson, Professor of Industrial Design, School of Engineering, Deakin University
  • Prof. Shi Yusheng, Professor, College of Materials Science and Engineering, Huazhong University of Science & Technology
  • Dr.S.C.Sharma, Pro-Vice-Chancellor, Dayananda Sagar University, Bangalore
  • Mr. Biju Uthup, Project Director(IUSAV), Aeronautical Development Agency, Bangalore.
  • Dr. Lalitha Chattopadhyay, Principal Scientist, Structures Division, National Aerospace Laboratories
  • Dr. P Selvaraj, Group Director,(CAD&PLM-PM), Aeronautical Development Agency, Bangalore
  • Dr. Ramachandra Rao, CSIR- National Aerospace Laboratories
  • Dr. Baldev Raj, Director, National Institute of Advanced Studies, Bangalore
  • Prof. Frank Liou, Mechanical Engineering Department, Director-Manufacturing Engineering Program, Missouri University of Science and Technology, Rolla
  • Todd J. Rockstroh, Ph.D., Consulting Engineer,GE Aviation, USA

Academic and Research & Development Organisations

  • Prof. Syed H. Masood, Swinburne University of Technology,Australia.
  • Prof. Milan Brandt, Director, RMIT Centre for Additive Manufacturing (RCAM), RMIT University,Victoria
  • Dr. Bahram Asiabanpour, Rapid Product and Process Development Center, Texas State University, USA
  • Prof. Bopaya Bidanda, University of Pittsburgh, USA
  • Prof. Chua Chee Kai, Nanyang Technological University, Singapore
  • Prof. Deon de Beer, Executive Director, Innovation and Technology Transfer, Vaal University of Technology, South Africa
  • Dr. B. Gurumoorthy, CPDM, Indian Institute of Science, Bangalore
  • Prof. Dr. Gideon Levy, Director- Institute for Rapid Product Development, Inspire AG, Switzerland
  • Dr.Khalid Abdel Ghany, Director, Rapid Prototyping & Manufacturing Group, CMRDI, Egypt
  • Dr.C.S.Kumar, Indian Institute of Technology (IIT), Kharagpur
  • Dr.A.Kushari, Indian Institute of Technology, Kanpur
  • Dr. Manoj K Tiwari, Indian Institute of Technology, Kharagpur
  • Dr. Pulak M Pandey, Indian Institute of Technology, Delhi
  • Dr. Sarat Singamneni, Director Additive Manufacturing Research Centre, AUT University, Auckland
  • Dr. Rajesh Ranganathan, Coimbatore Institute of Technology, Coimbatore
  • Dr. G.S.Saravana Kumar, Indian Institute of Technology, Chennai
  • Dr.Suman Das, Director, Direct Digital Manufacturing Laboratory, Georgia Institute of Technology, USA
  • Prof. Swapan Bhattacharya, Director - National Institute of Technology Karnataka, Surathkal
  • Dr.Wan Abdul Rahman, Director, Advanced Manufacturing Technology Centre, SIRIM, Malaysia
  • Dr.Phil Hackney, University of Northumbria, Newcastle, United Kingdom
  • Dr.K.P.Raju Rajurkar, Director, Center for Nontraditional Manufacturing Research, University of Nebraska, Lincoln, USA
  • Dr.Ming C.Leu, Director, Center for Aerospace Manufacturing Technologies, Missouri University of Science & Tech, USA
  • Dr. C.P. Paul, Head, Laser Additive Manufacturing Laboratory, Raja Ramanna Centre for Advanced Technology, Indore

Industry and Associations

  • Mr. Kumar Kandaswami, Deloitte Touche Tohmatsu India LLP,Chennai
  • Dr.Henri-Jacques Topf, Chairman, Schneider Prototyping, GmbH
  • Mr. Felip Esteve, Director, ASERM, Spain
  • Mr. Jukka Tuomi, President, Finnish Rapid Prototyping Association, Finland
  • Mr. José Antonio Jaldo, President, Spanish Association of Rapid Manufacturing
  • Prof. Olaf Diegel, President, New Zealand Rapid Manufacturing Association, New Zealand
  • Prof. Paulo Bartolo, Director, Additive Manufacturing Group, Leira, Portugal
  • Dr. Richard Hague, Director, EPSRC Centre for Additive Manufacturing, UK
  • Mr. Ajay Purohit, Tata Motors Ltd, Pune
  • Mr. Ashok Varma, CEO & Chairman, Efesto, USA
  • Sri. Parasuraman, Deputy Managing Director – Kirloskar Toyota Textile Machinery Pvt. Ltd., Bangalore Autoparts, Bangalore
  • Prof. David Ian Wimpenny, MTC, Coventry, UK
  • Dr. Phil Reeves, Managing Director, Econolyst Ltd., UK
  • Mr. Purnachandra Rao, GCFF Division, Mil Com SBU, Bharat Electronics Ltd, Bangalore
  • Dr. Terry Wohlers, Wohlers Associates Inc., USA.
  • Mr.Aditya Kumar, Marcopolo Products Pvt.Ltd.
  • Mr.Venkatesha N, Staff Scientist, SABIC Research & Technology Pvt. Ltd.
Technical Committee:

Chairman:

  • Prof. David Ian Wimpenny, Chief Technologist, Manufacturing Technology Centre, Coventry, UK.
  • Dr.Suman Das, Director, Direct Digital Manufacturing Laboratory, Georgia Institute of Technology, USA
  • Dr. Ramachandra Rao, CSIR- National Aerospace Laboratories
Organising Committee:

Conference Chair:

  • Dr.Henri-Jacques Topf, Chairman, Schneider Prototyping, GmbH
  • Dr. Pulak M Pandey, IIT, Delhi
  • Sri. Parasuraman, Deputy Managing Director – Kirloskar Toyota Textile Machinery Pvt. Ltd., Bangalore Autoparts, Bangalore.

Co - Chairman:

  • Dr. Pulak M Pandey, Indian Institute of Technology, Delhi.
  • Prof. Ian Gibson, Professor of Industrial Design, School of Engineering, Deakin University
  • Mr. Said Omar, Managing Director, ExOne GmbH.
Organising Committee :

Conference Chair:

  • Dr.Henri-Jacques Topf, Chairman, Schneider Prototyping, GmbH
  • Dr. Pulak M Pandey, IIT, Delhi
  • Sri. Parasuraman, Deputy Managing Director – Kirloskar Toyota Textile Machinery Pvt. Ltd., Bangalore Autoparts, Bangalore.

Organising Committee:

  • Dr. Khalid Abdel Ghany, Director, Rapid Prototyping and Manufacturing Group, CMRDI, Egypt.
  • Sri. L.Jyothish Kumar, Additive Manufacturing Society of India (AMSI)
  • Asst. Prof. Keshava Murthy D.B., Additive Manufacturing Society of India (AMSI)
  • Dr. T.N.Sridhar, Additive Manufacturing Society of India (AMSI)
  • Prof.Sunil S R Gaekwad, Additive Manufacturing Society of India (AMSI)